Codabar; Start/Stop Characters; Message Length - Hand Held Products 4410, 4710 User Manual

Linear Symbologies

Codabar

<Default All Codabar Settings>
Codabar
* On Off

Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
* Don't Transmit
Start/Stop Transmit
Start/Stop

Message Length

The message length selection is used to set the valid reading length of the bar
code. If the data length of the scanned bar code doesn't match the valid reading
length, the scanner will not read the symbol. You may wish to set the same value
for minimum and maximum length to force the scanner to read fixed length bar
code data. This helps reduce the chances of a misread.
3 - 2 IMAGETEAM™ 4410/4710 User's Guide