Good Read Delay; User-Specified Good Read Delay - Hand Held Products 4800p User Manual

Good Read Delay

This sets the minimum amount of time before the imager can read another bar
code. Default = No Delay.
* No Delay
Short Delay (500 ms)
Medium Delay (1,000 ms)
Long Delay (1,500 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar code
below, then set the delay (from 0-30,000 milliseconds) by scanning digits from
the inside back cover, then scanning Save .
User-Specified Good Read Delay
4800p 2D Imager User's Guide 3 - 3