Intermessage Delay
An intermessage delay of up to 495 milliseconds (in 5 ms steps) may be placed
between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5 millisecond steps (0-99), and the Save bar
code using the
Programming Chart
inside the back cover of this manual.
1st Scan Transmission
2nd Scan Transmission
Intermessage Delay
Intermessage Delay
To remove this delay, scan the Intermessage Delay bar code, then set the
number of steps to 0. Scan the Save bar code using the
Programming Chart
inside the back cover of this manual.
4800p 2D Imager User's Guide
4 - 7