Upgrade With Silent Installation Tasks; Performing Upgrade With Silent Installation Procedure; Upgrade With Silent Installation Tasks (Primary Node); Performing Upgrade With Silent Installation Procedure (Primary Node) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

4.
Eject the DVD-ROM.
# cd /
# umount dvdromMountPoint
The Storage Cruiser's agent upgrade is completed.
Refer to "7.5.4 Tasks to Be Performed After
Point
-
It is recommended that you back up the system before starting the upgrade.
By preparing a backup, in cases when an error occurs during the upgrade, it is possible to return the system to its state prior to the
upgrade, simply by recovering (restoring) the system from the backup.
-
If the upgrade was terminated abnormally, refer to
Solaris, Linux)" to recover the system to the normal state.
-
Once normal operation has been confirmed after the upgrade of the Storage Cruiser's agent, the backup data in the backup
destination directory created in step 5 of

7.5.3 Upgrade with Silent Installation Tasks

The upgrade is performed as follows:
1.

7.5.3.1 Performing Upgrade with Silent Installation Procedure

2.
7.5.3.2 Confirming Results of Upgrade with Silent Installation
7.5.3.1 Performing Upgrade with Silent Installation Procedure
1.
Execute the following command.
dvdromMountPoint/Agent_unix/Storage_Cruiser/Linux/scagtsilentinstall.sh [-l <installLogFile >]
2.
On completion of installation, a command prompt is displayed.
3.
Eject the DVD-ROM.
# umount dvdromMountPoint
Point
-
If nothing is specified for installLogFile, an install log file named "scagtsilentinstall.log" is created in the /var/tmp directory.
-
If there is any file of the same name as the specified install log file, it is overwritten.
-
It is required to specify an existing directory with write permission for the directory in which to store the install log file. If it has no
write permission, no error message is output in the command prompt or screen, and the process terminates with error.
Note
-
If an invalid option is specified, its corresponding error message is output in the install log file and the process exits. No error
message is output in the command prompt or screen.
-
Do not execute multiplexly the command for silent installation. If it is multiplexly executed, the command executed after that
terminates abnormally. At this time, an install log file is not created.
Upgrade" to set up the Storage Cruiser's agent.
"11.3.4 In Case of Problem During Upgrade of Storage Cruiser's Agent (for
"7.5.1.1 Backing Up Operational Environment of Previous
- 116 -
Version" maybe deleted.