Installation Parameter File (For Advancedcopy Manager Copy Control Module) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

-
When you use both the IPv4 and IPv6 addresses with the Management Server:
Set the IPv4 address used.
The following operations are executed after the Upgrade Installation is completed and the IPv6 address is added as the IP address
of the Management Server.
1.
Create a server information change instruction file on the Management Server. Describe both the IPv4 and the IPv6 addresses
as the IP address after it changes in the server information change instruction file.
2.
Execute the stgxfwcmmodsrv command with the -f option.
/opt/FJSVswstf/bin/stgxfwcmmodsrv -f serverInformationChangeInstructionFileName
Information
-
Refer to "Changing IP Address of Management Server" in the ETERNUS SF AdvancedCopy Manager Operation Guide at this version
corresponding to OS of the Management Server for the update procedure of IP address information.
-
Refer to "Command References" in the ETERNUS SF AdvancedCopy Manager Operation Guide at this version corresponding to OS of
the Management Server for this version for information on the command.
B.3 Installation Parameter File (for AdvancedCopy Manager Copy
Control Module)
The sample of the installation parameter file is provided on the DVD-ROM "ETERNUS SF SC/ACM Mediapack for Solaris (Manager
Program) (2/2)" or "ETERNUS SF SC/ACM/Express Mediapack for Linux 64bit (Manager Program) (2/2)" for this version.
-
Stored location
dvdromMountPoint/Manager_unix/install_parameter_ccm.txt
The following is the form of the installation parameter file.
#-------------------------------------------------#
# Installation function
# 1: ETERNUS SF Manager
# 2: ETERNUS SF AdvancedCopy Manager CCM
#-------------------------------------------------#
Installation_function: 2
- 320 -