Upgrade With Silent Installation Tasks; Performing Upgrade With Silent Installation Procedure - Fujitsu ETERNUS SF Express V16.6 Migration Manual

4.
When the upgrade is completed, the following installation wizard page is displayed. The upgrade process is completed. Click
Finish.
5.
Eject the DVDROM.
The Storage Cruiser's agent upgrade is completed.
Refer to "7.3.4 Tasks to Be Performed After
Point
If the upgrade was terminated abnormally, refer to
Windows)" to recover the system to the normal state.

7.3.3 Upgrade with Silent Installation Tasks

These tasks can be utilized in an environment of Windows Server 2008 and above.
The upgrade is performed as follows:
1.

7.3.3.1 Performing Upgrade with Silent Installation Procedure

2.
7.3.3.2 Confirming Results of Upgrade with Silent Installation
7.3.3.1 Performing Upgrade with Silent Installation Procedure
Note that if step 1 and step 2 have already been performed, it is unnecessary to perform these again.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack (Agent Program and Manual)" for this version into the DVDROM
drive. Furthermore, if the Installer screen is displayed by autorun, exit the installer.
3.
Start the command prompt with "Run as administrator".
Upgrade" to set up the Storage Cruiser's agent.
"11.3.3 In Case of Problem During Upgrade of Storage Cruiser's Agent (for
- 108 -