Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.2
Logging In with the Security Administrator Account
To use the key management function, you must log in to the remote panel using the security administrator
account with Secure Socket Layer (SSL) enabled.
The following describes the initial settings for logging in to the remote panel with the security administrator
account and the procedure for enabling SSL.
2.1.2.1
Changing the Initial Password of the Security Administrator Account
Change the password of the security administrator account with the [Configuration > User Accounts > Local
User Accounts] screen on the remote panel.
If the initial password has been changed, this procedure is not required.
Figure 2.2 Account setting screen
Procedure
1
Click "security" from the account list displayed on the lower part of the screen.
2
Select [Modify User Password] from [Actions].
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
23
Copyright 2019 FUJITSU LIMITED
P3AG-3762-02ENZ0