Restoring Common Control Repository (For Windows) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

2.
From a user with OS Administrator privilege, execute the following command to create backup data.
The file name of the created backup data is backupFileName.
/opt/FJSVesflm/bin/esflm backup $BAK_DIR/LM/backupFileName
A.19

Restoring Common Control Repository (for Windows)

Restore the common control repository.
Information
Notation in Procedure:
Directory Name
$BAK_DIR
$INS_DIR
1.
Stop the ETERNUS SF Express Tomcat service.
Open Service Control Manager to stop the following service.
-
ETERNUS SF Manager Tomcat Service
2.
Restore the backup data. The following procedure must be implemented by a user with administrator privileges for the operating
system.
1.
Execute the following command.
If you did not change the port number, specify 15432 for portNumber. If you did change the port number, specify the
changed port number for portNumber.
$INS_DIR\Common\sys\postgres\bin\psql -U esfpostgres -p portNumber postgres
2.
The prompt is displayed, and waiting for input. Input the following strings in order.
master01!
drop database esfdb;
\q
3.
Execute the following command to restore the backup data.
If you did not change the port number, specify 15432 for portNumber. If you did change the port number, specify the
changed port number for portNumber.
The backupFileName is the file name specified when the backup data was created.
$INS_DIR\Common\sys\postgres\bin\psql -U esfpostgres -p portNumber -f $BAK_DIR\Common
\backupFileName postgres
4.
The prompt is displayed, and waiting for input. Input the following strings.
master01!
3.
Start the ETERNUS SF Express Tomcat service.
Open Service Control Manager to start the following service.
-
ETERNUS SF Manager Tomcat Service
Note
After restoring the shared control repository, it takes approximately 2 minutes before Web Console becomes available.
Backup destination directory.
"Program Directory" specified at the ETERNUS SF Manager installation.
- 301 -
Explanation