Installing Your Tv/Dvd Combo - Insignia IS-TVDVD20A User Manual

TVDVD20A.fm Page 7 Tuesday, March 14, 2006 12:52 PM
Button Description
28 SUBTITLE Press to select subtitles for a DVD if
the DVD has subtitles.
29 PAUSE/STEP Press to pause playback. Press again
to advance the program one frame at a
time. Press PLAY/ENTER to return to
normal playback.
30 NEXT Press to go to the next scene on a
DVD or next track, song, or photo on a
CD.
31 PREV Press to go to the previous scene on a
DVD or previous track, song, or photo
on a CD.
32 REPEAT Press once to replay the current
chapter. Press twice to replay the
current title. Press three times to
replay the entire disc. Press four times
to cancel the repeat function.
33 A-B Press once to mark the beginning of a
section you want to repeat. Press
again when you reach the end of the
section you want to repeat. The
section is played repeatedly. Press
again to return to normal playback.
34 SLOW Press to playback in slow motion.
Each time you press SLOW, the speed
changes. Press PLAY/ENTER to
resume normal playback.
35 SEARCH Press to open the Search menu. Press
again to select. Use the number pad
buttons to enter the item number you
want. Press PLAY/ENTER to confirm
you selection.
36 TITLE/PBC Press to open the DVD menu if the
DVD you are playing has a menu. Use
the number pad button to enter the
item number you want.
37 D.CALL Press one or more times to display the
Title Elapsed, Title Remain, Chapter
Elapsed, Chapter Remain, and Display
off.
38 ZOOM Press to enlarge the screen image.
When you zoom, the center of the
image enlarges. This cuts off the other
edges of the image. Press one or more
times to return to normal viewing.
Installing your TV/DVD
combo
Using an antenna
To enjoy a clearer picture, we recommend that
you use a CATV system or an outdoor antenna.
In different places, the suitable antenna type and
position may vary.
AC power connector
Note
We recommend that you use a 75 ohm coaxial antenna to
avoid interference.
Note
To avoid interference from electrical signals, do not bind the
antenna cable together with any electrical wires.
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AA batteries. Make sure that the
+/– symbols on the battery match the +/–
marks inside the battery compartment.
3 Replace the battery cover.
Tip
When the remote control will not be used for a long period of
time or when the batteries are worn out, remove the batteries
to prevent leakage.
Warning
Do not throw the batteries into fire. Dispose of used batteries
as hazardous waste.
Caution
Do not drop, dampen, or disassemble the remote control.
www.insignia-products.com
VHF UHF
Antenna/CATV input
2x "AA"
7