Features - Insignia IS-TVDVD20A User Manual

TVDVD20A.fm Page 5 Tuesday, March 14, 2006 12:52 PM
Disc
Do not use a cracked, deformed, or repaired
disc. These discs are easily broken and may
cause serious personal injury and product
malfunction.
Note to cable system TV installer
This reminder is provided to call the Cable TV
system installer's attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and, in particular, specifies that the
cable ground shall be connected to the
grounding system of the building, as close to the
point of cable entry as practical.

Features

Front panel
1
7
8
5
9
6
Button/
Description
connector
1 Remote control Receives signals from the remote
sensor control. Do not block.
2 MENU Press to open the TV OSD.
3 PLAY Press to start disc playback.
4 Standby Power Press to turn your TV/DVD combo
on and off or to "wake" your
TV/DVD combo if it is in standby
mode.
5 Headphone jack Plug headphones into this jack.
6 VIDEO Plug your external video device
into this connector.
7 L-AUDIO-R Plug your external audio system
into these connectors.
8 Power indicator This indicator lights when your
TV/DVD combo is turned on.
9 TV/DVD Press to select TV or DVD mode.
10 V – and V + Press to decrease or increase the
volume.
11 CH – and CH + Press to change the TV channel.
12 OPEN/CLOSE Press to open the DVD tray. Press
again to close the tray.
13 STOP Press to stop DVD playback.
Back panel
2
3
4
11 12 13
10
www.insignia-products.com
1
2
3
4
5
Connector
1 DVD Video Y input connector
2 Coaxial output terminal
3 DVD Video Cb input connector
4 Video output connector
5 Video input connector
6 DVD Video Cr input connector
7 Antenna/CATV input connector
8 Audio right channel output connector
9 Audio left channel output connector
10 Audio right channel input connector
11 Audio left channel input connector
6
7
8
9
10
11
5