5 Press OK/ENTER. Your TV/DVD combo scans for
channels, if necessary.
Choose your TV source
Antenna
Cable
Cable/Satellite box
Scan for channels
Move
OK
ENTER
Select Antenna if using an antenna for standard or HD TV.
When the scan is complete, your
TV/DVD combo displays the first channel in the
memorized channel list. You can stop the scan
by pressing EXIT.
Understanding the basics
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Turning your TV/DVD combo on and off
To turn your TV/DVD combo on and off:
1 Press
POWER. The power indicator turns
blue and your TV/DVD combo turns on.
2 To turn off your TV/DVD combo, press
POWER again. Your TV/DVD combo turns off
and the power indicator turns red.
Note
When your TV/DVD combo is turned off, power still
flows into it. To disconnect power, unplug the power
cord.
Selecting the video input mode
Your TV supports multiple video input modes.
To select the video input mode:
1 Press INPUT to display the input source menu,
then press INPUT repeatedly or press
select a video input mode. You can select:
• TV
• AV1
• AV2
• S-Video
• Component 1
• Component 2
• DVD
• HDMI1
• HDMI2
• HDMI3
• VGA
2 Press OK/ENTER.
Digital Channels
0
Analog Channels
0
Select
Previous
MENU
EXIT
or
www.insigniaproducts.com
Selecting a channel
To select a channel:
• To go to the next or previous channel in the
channel list, press CH and CH . Pressing one
of these buttons skips any channels that are
not in the channel list. The channel list was
created when you ran the Setup Wizard or
when you scanned for channels.
• To select an analog or main digital channel,
press the number buttons for the channel.
• To select a digital sub-channel, press the
number buttons for the main digital channel,
Exit
press , then press the number for the digital
sub-channel.
• To tune to the last viewed channel, press
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press
to restore the sound.
Viewing channel information
To view channel information:
1 In digital TV mode, select a channel you want to
watch.
2 Press INFO to display information about the
program content, if available.
CH 14.1
BART-TV
TV-14 / IQ-NL
No Event Information
3 Press INFO again to close the display.
to
RECALL.
MUTE to turn off the sound. Press again
CC Off
704×480 Audio 1/1(L | R)
05/20/2005 08:00 AM
Sound On
TV-14 / NL
17