Table of Contents
Advertisement
Emergency Stop Switch
Reset the external stop button.
Battery voltage
Check belt tension. Refer to Drive Belt, Check and Change page 84.
Check battery fluid level. Refer to Battery, Maintenance page 100.
Can Not Start, Trim Too High
Can the engine not be started and the message "Can Not Start, Trim Too
High" shows this indicates that the drive is tilted too high or a possible trim
sender failure. it is possible to override the immobilizer by holding the ignition
key in the start position "III" for 5 seconds then letting it return to position "0".
Check Control Lever
Shift and throttle incorrect.
Slip function not available.
Acknowledge fault by moving control to neutral and press OK-button.
Engine power is reduced. Gear automatically set to neutral.
Check Engine
Miscellaneous system faults. Engine performance might be affected.
Some possible explanations to the disturbance listed.
•
Battery voltage incorrect.
Check belt tension. Refer to Drive Belt, Check and
Change page 84.
Check battery fluid level. Refer to Battery, Maintenance page 100.
•
Fuel pressure incorrect. Engine performance might be affected.
•
Communication failure. Gear automatically set to neutral. Engine per-
formance might be affected.
•
Oil pressure too low.
Engine power is reduced. Checking Engine Oil Level. Refer to Oil level,
checking and topping up page 86.
Check that no leakage occurs.
Please contact a Volvo Penta workshop if the fault remains.
Check EVC System
Internal fault in EVC system. Engine performance might be affected.
Some possible explanations to the disturbance listed.
•
Limited or no steering. Please contact a Volvo Penta workshop.
•
Shift and throttle unavailale. Gear automatically set to neutral. Engine
power is reduced. Helm station has lost communication with engine.
Use alternative helm station if possible.
•
Control panel failure. Check if any button has stuck.
Please contact a Volvo Penta workshop if the fault remains.
Check Joystick
Joystick failure. Check if any button has stuck.
Joystick not available or limited function. Use steering wheel or choose alter-
native station.
Check Multilink
Limited instrumentation. Control unit has communication fault.
47705992 05-2015 © AB VOLVO PENTA
Fault Code Register
67
Hide quick links:
Advertisement
Table of Contents
