Volvo Penta D3 Operator's Manual page 129

Hide thumbs Also See for D3:
Table of Contents

Advertisement

Settings
Key Management
Show e-Key
for Authorization
Add Key
Delete Key
Check Key
Identify e-Key
P0016540
47705992 05-2015 © AB VOLVO PENTA
Checking keys
Checking a key ID
1 Go to Settings > Key Management.
2 When the text Show e-Key For Authorization is
shown hold a registered key in front of the key
panel. The system will check that the key ID corre-
sponds to a key registered in the system.
3 Select Check keys.
4 Hold the key to be checked in front of the panel. The
key ID will be shown on the display.
Joystick
Joystick calibration need only be carried out if boat
movements do not correspond to joystick movements.
When calibrating the joystick the boat must be driven
on open waters in safe conditions. Avoid calibrating in
high winds or currents that can influence the result of
the calibration.
Allow the boat to run for a fairly long distance during
the calibration. Hold the joystick firmly in position.
Calibration can only be carried out at a helm station
that is equipped with both a joystick and a control
panel.
Calibration need only be done in one direction, port or
starboard.
Calibration and Settings
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents