Volvo Penta D3 Operator's Manual page 23

Settings
47705992 05-2015 © AB VOLVO PENTA
Settings
Display and various system function settings are done
in the settings menu. The information shown varies
depending on the installation.
Navigate to the desired setting or function and press
to reach the sub menu.
Key Management, add and remove keys, refer to Key
Management page 126.
Day/Night-Mode
Day shows dark text against a light background and
Night light text against a dark background.
Fuel Tank
Fuel tank calibration and settings. For information
regarding calibration, refer to Fuel Tank page 125.
Drive Type
The setting may only be made by authorized Volvo
Penta personnel.
Toe-In/Toe-Out Adjustment
The setting may only be made by authorized Volvo
Penta personnel.
Neutral Beep
Switches the beeper that sounds when the control is in
the neutral position on and off.
Info Beep
Switches the signal that confirms when a function has
been activated or deactivated on and off.
Info Beep Level
Sets the volume (%) of the Info Beep that confirms
when a function has been activated, or deactivated.
PTA Calibration
Calibration and resetting, PTA. For information regard-
ing calibration, refer to PTA Calibration page 124.
Trip Reset
Zeroes all values in the trip computer.
ACP Mode
Setting the ACP protection position. For information on
the ACP function, refer to ACP.
Depth Alarm
Setting the depth alarm function; refer to Depth
Alarm page 120.
Display Contrast
Contrast adjustments affect all displays in the system.
Display Type
Select the engines for which the information will be
shown in the display, and the type of installation the
display forms part of.
Instruments and Controls
21