Volvo Penta D3 Operator's Manual page 18

Instruments and Controls
P0001308
16
Contrast and backlighting
The button on the far right is used to adjust contrast
and panel backlighting. The button is also used to con-
firm fault messages.
Backlighting
Contrast
Press the button to adjust the contrast and the back-
lighting.
Use + and – to increase or reduce the contrast or back-
lighting.
Adjustments affect all screens in the system.
Fault message
is displayed on the screen when the system dis-
covers a fault.
All fault messages must be acknowledged. Acknowl-
edge by pressing the button; if the fault is accompanied
by an audible signal, the signal will silenced. Go to the
information panel to get information regarding the
alarm.
For further information on how to handle fault mes-
sages and recommended actions, refer to the Fault
Handling page 63 and Fault Code Register chapters.
47705992 05-2015 © AB VOLVO PENTA