Table of Contents
Advertisement
1
3
4
P0001049
1
Symbol
2
Shows which driveline the fault was detected in.
3
List of registered faults; turn the knob to browse.
4
Fault message with description and suggestion for action.
5
Service information.
47705992 05-2015 © AB VOLVO PENTA
2
5
Gauge Range: setting instrument maximum range.
Boat Speed: 10 – 100 knots in 10 knot stages.
Engine Speed: 2500/3000/4000/5000/6000 rpm.
Propeller speed: 1000/2000/3000 rpm.
EVC Information: this information cannot be changed.
Features: installed functions are marked blue.
Components: press
nents.
Software: information regarding the software ID
number.
Calibration
The following is only displayed if the function is instal-
led. For further information refer to the appropriate
section in the Settings Menu page 119 chapter.
Speed Correction: setting the speed factor.
Depth: setting the echo sounder depth alarm. Fol-
low the instructions on the screen.
Fuel Tank: fuel tank calibration. Follow the instruc-
tions on the screen.
ACP Info: setting the ACP protection position.
PTA: PTA calibration. Follow the instructions on the
screen.
Warning Manager
If the system discovers a fault, the helmsman is
informed by a message on the display. The fault mes-
sage must be acknowledged by pressing
All faults are stored in the Warning Manager.
A fault message indicates the drivetrain affected,
describes the fault and suggests suitable actions.
For further information on fault messages, refer to
Fault Handling page 63.
Instruments and Controls
to see installed compo-
OK
.
OK
31
Hide quick links:
Advertisement
Table of Contents
