Fibre Channel Sfp Transceivers; Combination Fibre Channel/Gigabit Ethernet Sfp Transceivers; Cwdm Combination Fibre Channel/Gigabit Ethernet Sfp Transceivers; Gigabit Ethernet Sfp Transceivers - Cisco MDS 9500 Series Hardware Installation Manual

Chapter 1 Product Overview
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Fibre Channel SFP Transceivers

Cisco Fibre Channel SFP transceivers are available in SWL or LWL versions. Both of these versions are
1-Gbps/2-Gbps/4-Gbps capable. Cisco Fibre Channel SFP+ transceivers are available in SWL or LWL
versions. Both of these versions are 2-Gbps/4-Gbps/8-Gbps capable.
Cisco Fibre Channel SFP transceivers have LC connectors and comply with 1-Gbps/2-Gbps/4-Gbps
Fibre Channel standards as defined in FC-PI 10.0 2. Cisco Fibre Channel SFP+ transceivers have LC
connectors and comply with 2-Gbps/4-Gbps/8-Gbps Fibre Channel standards as defined in FC-PI-4.
For more information about Fibre Channel SFP and SFP+ transceiver specifications, see the
SFP+ Transceiver Specifications" section on page

Combination Fibre Channel/Gigabit Ethernet SFP Transceivers

The combination Fibre Channel/Gigabit Ethernet SFP transceivers from Cisco Systems are available in
SWL or LWL versions. Both of these versions are 1-Gbps/2-Gbps capable.
The combination SFP transceivers from Cisco Systems have LC connectors and comply with
1-Gbps/2-Gbps Fibre Channel as defined in FC-PI 10.0 2 and Gigabit Ethernet as defined in IEEE
802.3z.
For more information about Fibre Channel/Gigabit Ethernet SFP transceiver specifications, see the
and SFP+ Transceiver Specifications" section on page

CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers

The Cisco CWDM SFP transceivers have LC connectors and support Gigabit Ethernet and
1-Gbps/2-Gbps Fibre Channel. They match the wavelength plan of Cisco CWDM GBICs and Cisco
CWDM optical add/drop multiplexers (OADMs). Cisco 4-Gbps CWDM SFP transceivers are also
available.
CWDM SFP transceivers are used in the following ways:
•
•
There are eight different "colors" of CWDM SFP transceivers, one for each fixed wavelength. The
fiber-optic cables from the CWDM SFP transceivers must be connected to an OADM. The OADM
combines the wavelengths of the different outgoing signals into one composite send signal. The OADM
also separates the received transmissions into the different wavelengths and sends them to the
corresponding CWDM SFP transceiver.
For more information about CWDM SFP transceiver specifications, see the
Specifications" section on page

Gigabit Ethernet SFP Transceivers

The 4-port and 8-port IP Storage Services (IPS-4 and IPS-8) modules provide four or eight 1-Gigabit
Ethernet ports that support Gigabit Ethernet SFP transceivers. The Gigabit Ethernet SFP transceivers
have RJ-45 connectors and support Gigabit Ethernet (1-Gbps).
OL-19587-01
CWDM transmission can send and receive up to eight laser wavelengths carrying different signals
simultaneously on the same optical fiber using an OADM.
ELWL signals can transmit over longer distances than LWL SFP transceivers.
C-22.
C-22.
C-22.
Cisco MDS 9500 Series Hardware Installation Guide
Supported Transceivers
"SFP and
"SFP
"SFP and SFP+ Transceiver
1-57