Appendix; Technical Specifications; Switch Specifications - Cisco MDS 9500 Series Hardware Installation Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Technical Specifications

This appendix provides technical specifications and includes the following sections:
•
•
•
•
•
•
•
Note Specifications for cables and connectors are provided in

Switch Specifications

The Cisco MDS 9500 Series supports hot-swappable fan modules that provide 85 cfm (cubic feet per
minute) of airflow per slot with 410 W of power dissipation per slot.
Table C-1
Table C-1
Description
Temperature, certified for operation
Temperature, designed and tested for operation 32 to 130°F (0 to 55°C)
Temperature, ambient nonoperating and storage -40 to 158°F (-40 to 70°C)
Humidity (RH), ambient (noncondensing)
operating
Humidity (RH), ambient (noncondensing)
nonoperating and storage
Altitude, certified for operation
Altitude, designed and tested for operation
Noise levels
OL-19587-01
Switch Specifications, page C-1
Module Specifications, page C-4
Power Specifications for the Cisco MDS 9513 Director, page C-6
Power Specifications for the Cisco MDS 9509 Director, page C-9
Power Specifications for the Cisco MDS 9506 Director, page C-14
X2 Transceiver Specifications, page C-19
SFP and SFP+ Transceiver Specifications, page C-22
lists the environmental specifications for the Cisco MDS 9500 Series.
Environmental Specifications for the Cisco MDS 9500 Series
A P P E N D I X
Appendix D, "Cable and Port Specifications."
Specification
32 to 104°F (0 to 40°C)
10 to 90%
5 to 95%
0 to 6500 ft (0 to 2000 m)
-200 to 10000 ft (-60 to 3000 m)
70 dB
Cisco MDS 9500 Series Hardware Installation Guide
C
C-1