Daily Inspection - AGFA DX-D 60C User Manual

44 | DX-D 60C, DX-D 60G | Introduction to the DR Detector

Daily inspection

Cable
1. Ensure that cables are not damaged and cable jackets are not torn.
2. Ensure that the power cord plugs are securely connected to both the
equipment AC inlet and the AC outlet.
Detector
1. Ensure that there are no loose screws or breaks.
2. Ensure that there is no dust or foreign matter on the DR Detector cable
connector.
After turning on the power
Start the NX workstation before performing a test exposure.
0294B EN 20190221 1131
WARNING:
For safety reasons, be sure to turn OFF the power to each piece of
equipment before performing the following. Otherwise, an electric
shock may result.