X-Ray Generator Control In The Operator Room - AGFA DX-D 300 User Manual

20 | DX-D 300 | Introduction

X-Ray generator control in the operator room

The X-Ray generator control box contains buttons to switch on and off the X-
Ray generator and a handswitch to make exposures.
Figure 8: the X-Ray generator control box
Following warning is printed on the X-ray generator control box in English:
This label is on the X-ray generator control box. If the system has just been
stopped, wait at least 10 seconds before starting it again.
0172G EN 20230627 1651
WARNING:
This x-ray unit may be dangerous to patient and operator unless
safe exposure factors, operating instructions and maintenance
schedules are observed.