Names Of Parts; Front And Left Side - Konica Minolta DRYPRO 873 Operation Manual

2�2 Names of Parts
Names of parts and functions of DRYPRO 873 are given below:
2�2�1

Front and Left Side

(1)
Status LED
(2)
Operation switch
(3) Power supply
circuit breaker
(4) Power cable
(5) Operation manual box
(6) Air intake
Num-
Name
ber
(1)
Status
LED
(2)
Operation
switch
(3) Power supply
circuit breaker
(4) Power cable
(5) Operation
manual box
(6) Air intake
(7) Film ejection
tray
(8) Cutter
pocket
(9) Operation panel
Function
How the LED is lit indicates various states.
OFF Power off, standby mode, shutting down,
rebooting, or updating
Flashing Increasing temperature, or printing
blue
Blue light Ready to print
ON
Flashing Not ready to print (error, resolving error,
red or all trays are empty)
Red Not ready to print (one tray is empty,
light maintenance is being performed, film is
ON being replaced, filter is being replaced, or
unit is being cleaned)
Starts and stops DRYPRO 873.
Used to turn on/off the main power supply.
Used to connect between DRYPRO 873 and the
power supply.
Operation manual is stored.
Draws air to cool the inside.
Printed films are ejected into this tray.
Holds the special cutter for opening a film package
(barrier bag).
Operates DRYPRO 873. Additionally, messages
are displayed on this panel.
27
(7) Film ejection tray
(8) Cutter pocket
(9) Operation panel
(10) Front cover
(11) Supply tray 1
(11) Supply tray 2
(12) Supply tray 3
Refer to
3.2.2 Status LED Display
(page 41)
3.1 Starting and Shutting Down
(page 36)
3.1 Starting and Shutting Down
(page 36)
―
―
5.3.3 Cleaning Air Intakes/Outlets
(page 108)
5.3.1 Cleaning Film Ejection Tray
(page 107)
―
2.2.3 Operation Panel (page
29)
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2