Table of Contents
Advertisement
5�3 Cleaning Parts
This section describes the parts that require periodic cleaning.
5�3�1
Cleaning Film Ejection Tray
The film ejection tray tends to be dusty. Dust could damage the printed film. Wipe off the dust with dry
cloth once every three months.
5�3�2
Cleaning Supply Tray
Keep the inside of the supply tray clean. Wipe off the dust with dry cloth or vacuum the dust once every
three months.
When wiping with cloth, be careful not to get injured by a protrusion
in the supply tray�
107
Film ejection port
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
Advertisement
Table of Contents
