Table of Contents
Advertisement
Regular Maintenance Information
Icon
Roller Cleaning
Filter Replacement
Regular Maintenance
Calibration
Tray Information
The tray information, film size, film type, and number of sheets is displayed for each tray.
Icon
tray 1
tray 2
tray 3
Items
film size
14×17,14×14,11×14,10×12,8×10
film type
B (BLUE), C (CLEAR), M (MAMMO)
film number 0 to 126 (The tray is empty when this is "0".)
3�2�2
Status LED Display
How the LED is lit indicates various states.
Status Message
OFF
Flashing blue
Blue light ON
Flashing red
Red light ON
Name
Roller Cleaning must be performed.
The filter must be replaced.
Regular maintenance must be performed.
Calibration must be performed or a density read error has been
detected. (This is cleared after calibration is performed.)
Name
Information for tray 1 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
Information for tray 2 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
Information for tray 3 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
Power off, standby mode, shutting down, rebooting, or updating
Warming Up or printing
Ready to print
Not ready to print (error, resolving error, or all trays are empty)
Not ready to print (one tray is empty, maintenance is being performed, film is being
loaded, filter is being replaced, or unit is being cleaned)
41
Meaning
Meaning
display
Meaning
Operation Mode
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
Advertisement
Table of Contents
