Table of Contents
Advertisement
2�3 Structure
The structure of DRYPRO 873 is shown below. Film is fed in the order from (1) ((2), (3)) to (11) during
the print process.
(11) Film ejection port
(10) Cooling/Transport unit
(9) Heat process unit
(1) Supply tray 1
(2) Supply tray 2
(3) Supply tray 3
Num-
Name
ber
(1)
Supply tray 1
(2)
Supply tray 2
(3)
Supply tray 3
(4)
Elevating trans-
portation unit
(5)
Position regula-
tion unit
(6)
Sub-scanning unit
(7)
Exposure unit
(8)
Deodorant Filter
(9)
Heat process unit Develops the exposed film by heating.
(10) Cooling/Transport unit Cools and discharges heat developed film.
(11) Film ejection port
(8)
Function
Picks up a sheet of film in the supply tray 1 and
transports to the position regulation unit.
Picks up a sheet of film in the supply tray 2 and
transports to the elevating transportation unit.
Picks up a sheet of film in the expansion tray and
transports it to the position regulation unit.
Transport film transported from the supply tray 2
and 3 to the position regulation unit.
Regulates the horizontal position of the film trans-
ported from the supply unit to the exposure unit.
Transports film transported from the position regula-
tion unit to the exposure unit.
Scans laser beam in synchronization with the film
transportation and writes images on the film.
Removes odors emitted during heat process. Peri-
odic change is needed.
Printed films are ejected.
Deodorant Filter
2.2.6 Expansion tray (optional) (page 32)
2.2.7 Mammography media expan-
sion tray (optional) (page 33)
5.4 Changing Deodorant Filter (page
109)
34
(7) Exposure unit
(6) Sub-scanning unit
(5) Position regulation unit
(4) Elevating transportation
unit
(4) Elevating transportation
unit
Refer to
―
―
―
―
―
―
―
―
―
Advertisement
Table of Contents
