Repair; Am-Esp-S005-Xxxx / Am-Esp-S010-Xxxx Standard Type - Delta S Series Installation And Maintenance Instructions Manual

Delta Electronics Servo Press S-Series Installation and Maintenance Instructions

4.2 Repair

4.2.1

AM-ESP-S005-XXXX / AM-ESP-S010-XXXX Standard Type

The fastening ports for attaching the servo press are shown in the figure below. Please use 4 general
M10X1.5 hex screws (JIS strength 12.9, length 45) and apply the tightening torque of 663 kgf-cm.
Locking and fastening site
Caution: Please note that the equipment has to be closely attached to the locking and fastening platform
while fastening the servo press.
11