Restriction Of Jigs - Delta S Series Installation And Maintenance Instructions Manual

Delta Electronics Servo Press S-Series Installation and Maintenance Instructions
Caution: The top of the spindle punch is installed with the load cell. Do not assemble tools in a way
that could result in deviations or impacts.
※The recommended jig spindle size is shown in the figure below.
4.4.3

Restriction of Jigs

Punch dimensions and recommended jig designs are provided in the preceding three sections.
Extended descriptions and precautions are provided hereunder. See the table below:
Item
Jig weight (Payload)
Center of the jig
For the weight limits, please follow those shown in the catalog [front-
end load requirements of the spindle]. When the limits are
exceeded, it will result in the spindle moving downwards due to
gravity upon shutdown.
Efforts should be made during design to have the center of the
jig overlap the core of the spindle. Otherwise, the partial load will
damage the loaded elements.
17
Description