Preparing Your Workstation - HP Visualize c100 Install Manual

Preparing Your Workstation

Preparing Your Workstation
Before starting the upgrade, use the following procedure to prepare the
workstation:
CAUTION: Before you power down your system be sure to close applications and save
any work where applicable.
1 Power off your workstation by pressing the power button on the front panel.
2 Power down the system.
3 Unplug the power cord of the system unit, the monitor, and any peripheral
4 Unplug the power cord from the back of the system unit.
WARNING: To avoid electrical shock, make sure you unplug the power cable from
the wall outlet and the system unit before proceeding any further.
CAUTION:
The internal components of your workstation are susceptible to mechanical and
electrostatic shock. To prevent such damage from occurring, observe the following
precautions during the installation procedure.
2
When you press the power button, the workstation automatically shuts down the
operating system before it powers off the system.
devices from ac wall outlets.
•
Stand on a static-free mat (if available)
•
Wear a static-grounding wrist strap to ensure that any accumulated electrostatic charge
discharges from your body to ground. Attach the static-grounding wrist strap by fol-
lowing the instructions on the package that contains the strap. Be sure to attach one
end of the strap to the system chassis.