Removing The Storage Tray - HP Visualize c100 Install Manual

Removing the Storage Tray

Removing the Storage Tray
Perform the following procedure to remove the storage tray from the system
unit:
1 Remove the storage tray retaining screw, as shown in Figure 2.
2 If installed, remove any locking device from the storage tray security loop on the
3 Place your fingertips in the groove on the bottom of the storage tray bezel. See
Figure 2
4 Slide the storage tray completely out of the system unit.
CAUTION: Be sure to support the storage tray from underneath while sliding it out of
the system unit.
4
rear of the system unit.
Figure 2.
Retaining Screw
Removing the Storage Tray