Installing Thin Client Options
Various options can be installed on the thin client:
●
Installing the USB Device on page 16
●
Removing and Replacing the Battery on page 17
Installing the USB Device
Before beginning the replacement process, review
on page 11
for procedures you should follow before and after installing or replacing hardware.
Insert the USB device into the USB port in the secure USB compartment. See the following
▲
illustration for the location of the ports in the secure USB compartment.
Figure 2-6
If you install a USB mouse and a USB keyboard in the secure USB compartment, route the cables
around and through the clips, then out the secure cable routing slot, as shown in the following illustration.
Figure 2-7
16
Chapter 2 Hardware Changes
USB ports in the secure USB compartment
Using the secure cable routing slot
General Hardware Installation Sequence