Appendix A Specifications - HP t5145 Hardware Reference Manual

A Specifications
Table A-1 HP t5145/t5540/t5545/t5630 Thin Client
Dimensions
Width
Height (without stand)
Height (with stand)
Depth
Approximate Weight
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of 1° C/
300m (1.8° F/1000ft) to a maximum of 3Km (10,000ft), with
no direct, sustained sunlight. Upper limit may be limited by
the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457m per minute or 1500 ft
per minute)
Nonoperating
(max. allowed rate of change is 457m per minute or 1500 ft
per minute)
Power Supply
Operating Voltage Range
52.07 mm
209.55 mm
219.70 mm
215.90 mm
1.54 kg
10° to 40° C
-30° to 60° C
** The operating temperature range when the thin client
is attached to a flat panel using the HP Quick Release
is 50° to 95° F (10° to 35° C).
10–90%
5–95%
3048 m
9144 m
100–240 VAC
2.05 in.
8.25 in
8.65 In
8.50 in.
3.40 lb
50° to 104° F
-22° to 140° F
10–90%
5–95%
10,000 ft
30,000 ft
100–240 VAC
19