Replacing The Secure Usb Compartment Cover - HP t5145 Hardware Reference Manual

2. Push the compartment cover about .6 cm (1/4 inch) toward the front of the unit (2) and lift it off the
unit (3).
Figure 2-1

Replacing the Secure USB Compartment Cover

To replace the secure compartment cover:
1. Place the cover on top of the unit so it is offset about 0.6 cm (1/4 inch) toward the front of the unit,
allowing the tabs on the cover to align with the slots on the chassis (1).
2. Slide the cover toward the back of the unit until the cover is flush with the back panel of the chassis
(2).
3. Replace the screw (3).
Figure 2-2
Removing the secure USB compartment cover
Replacing the secure compartment cover
Removing and Replacing the Secure USB Compartment Cover 13