Canon varioPRINT 135 Series Operation Manual page 87

Media Registration Quick Start
[27] Perform the media registration via the media catalog
2. Touch [Registration].
3. When you start a media registration from the media catalog, select the feed direction for
which you want to perform the media registration. The media registration can be different for
LEF and SEF.
When you start a media registration from the trays view, the feed direction is already
selected.
If the printer is not warmed up, the media registration starts by warming up the printer.
4. Select [Automatic adjustment] or [Manual adjustment]. It is recommended to start with the
automatic media registration adjustment.
At [Automatic adjustment], touch [Start].
When you select [Manual adjustment], go to step 8.
5. Follow the instructions on the control panel to scan the printed registration sheets.
6. You can verify the result of the automatic registration adjustment on the verification chart.
Touch [Print verification chart] to print the verification chart.
NOTE
Depending on the media type and the media size, the dots, circles and lines on the verification
chart do not have to match perfectly.
7. If you perceive that the media registration is not optimal, you must perform a manual media
registration adjustment. But after automatic media registration, the media registration is
optimal in almost all cases.
At the [Manual adjustment], touch [Start].
8. In the manual registration adjustment, you can adjust the registration parameters for the front
side and the back side separately. Only use [Advanced settings] in exceptional cases. Use
[Advanced settings] carefully because these settings influence each other.
86 Chapter 5 - Media Handling
Canon varioPRINT 135 Series