Canon varioPRINT 135 Series Operation Manual page 216

Step Action
3 Align the top edge of your original with
the back edge of the glass plate (by the
arrow in the upper-left corner).
4 Gently close the ADF to prevent personal
injury or damage to the scanner.
5 Define the copy or scan settings on the
control panel and touch [Start] .
6 When the copy or scan job is ready, open
the ADF and remove the original from the
glass plate.
7 Gently close the ADF to prevent personal
injury or damage to the scanner.
Canon varioPRINT 135 Series
NOTE
When you enlarge an A4 or A5
original onto A3 paper, place
the original horizontally on the
glass plate, and align it with the
A4R or A5R marks.
NOTE
When you enlarge a Letter or
Statement original onto 11"x17"
or Legal paper, place the origi-
nal horizontally on the glass
plate, and align it with the Let-
terR or StatementR marks.
Copy or Scan Originals Using the Glass Plate
Illustration
Chapter 7 - Carry Out Copy Jobs 215