Change The Print Job Settings On Page Level - Canon varioPRINT 135 Series Operation Manual

Change the Print Job Settings on Page Level

Introduction
You can change settings of a job on page level via the [Page programming] in the job properties.
Procedure
1.
On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2. Touch the job you want to change.
3. Touch [Properties], or double-tap the job to open the [Properties] window.
4. If you want to carry out extended page programming, touch [Page programming].
5.
Change the required settings.
6.
Press [OK].
Canon varioPRINT 135 Series
Change the Print Job Settings on Page Level
Chapter 6 - Carry Out Print Jobs 177