Scan To Email - Canon varioPRINT 135 Series Operation Manual

Scan to Email

Scan to Email
Procedure
1. Place the originals face up into the automatic document feeder (ADF), or place one original face
down on the glass plate.
2. On the control panel, touch [Jobs] -> [Copy/Scan].
3.
Select a scan profile.
The job window opens.
NOTE
The system administrator can create scan profiles in addition to the factory default profiles (see
Use the Scan Profiles File (sjt.csv) on page
4. Select email as [Destination].
5.
Change the settings for the original and the file.
6.
If applicable, change the subject at [Email subject].
A keyboard appears to enter the subject.
7.
At [Email address] enter an email address or user ID.
You can enter more email addresses when you configured this option in the Settings Editor (see
Configure the Settings for Scan to Email on page
When you entered a user ID, the corresponding email address is displayed. You must configure
the connection between the ID and email address (see
on page 253
8.
Touch [Start]
The scanner scans the originals. The system sends the resulting file to the entered email address
or email addresses.
270 Chapter 8 - Carry Out Scan Jobs
Use the Address List File (ral.csv) on page
and
.
255).
252). Separate the email addresses with a ';'.
Configure the Settings for the LDAP Server
254).
Canon varioPRINT 135 Series