Change A Number Of Settings In The Settings Editor Via The Control Panel - Canon varioPRINT 135 Series Operation Manual

Change a Number of Settings in the Settings Editor via
the Control Panel
Introduction
NOTE
The information contained in this section is primarily intended for key operators and system
administrators.
The Settings Editor application on the PRISMAsync controller is a web based application that
allows key operators and system administrators to adapt the system completely to the situation
in an organization and production environment. The Settings Editor allows key operators and
system administrators to manage settings with regard to network configuration, system
preferences, job preferences and media, for example.
For convenience reasons, a subset of frequently used settings is accessible through the control
panel.
Settings available via the control panel
Group of settings
[About]
[Software updates]
[Software licenses]
Canon varioPRINT 135 Series

Change a Number of Settings in the Settings Editor via the Control Panel

Available settings
• [Serial number]
(read-only)
• [Version of printer
software] (read-on-
ly)
• [Download auto-
matically]
• [Upgrade software
(from USB)]
• [Upgrade software
(from server)]
• [PRISMAsync
downgrade]
• [Install Windows
update]
• [Uninstall Windows
update]
• [Upload license]
Short description
The [About] section allows you to look up the
serial number and software version of the
printer.
You can upgrade the printer software and the
Microsoft® Windows® software through this
section. You can downgrade patches through
this section. Follow the instructions on the
control panel when you upgrade or down-
grade the software.
When you enable [Download automatically] an
update is downloaded automatically, when
available via ORS. You only have to install the
update.
From release 3.3 onwards, you can select the
setting to keep existing jobs on the system
when you upgrade the software from USB.
From release 3.3 onwards, the jobs on the sys-
tem are not deleted after you upgraded the
software from server.
When you have a new license to activate a
new feature on the printer, you can upload the
license through this section. After uploading
the license, the feature becomes active.
You can only use this section after you inser-
ted an USB drive in an USB port on the control
panel.
Follow the instructions on the control panel
when you upload the license.
Chapter 4 - Adapt Printer Settings to Your Needs
4
37