Create A Hotfolder Default Ticket ('Default_Ticket.jdf') - Canon varioPRINT 135 Series Operation Manual

Create a Hotfolder Default Ticket ('default_ticket.jdf')

Introduction
Hotfolders are primarily aimed at recurring PDF workflows. In these workflows identical PDFs, or
other printable files, with identical settings are printed on a regular basis. A hotfolder default
ticket ('default_ticket.jdf') in the hotfolder determines the settings for the print jobs. The name of
the hotfolder default ticket must not be changed, otherwise it will not be used in the hotfolder.
NOTE
If you want to use the hotfolder default ticket, make sure that the [Overrule the job ticket] setting
of the automated workflow in which the hotfolder was created, is disabled (no check mark in the
checkbox). Otherwise, the settings of the automated workflow overrule the settings of the
hotfolder default ticket.
Procedure
NOTE
This procedure is an example of the procedure on a Microsoft
For other operating systems, the procedure can vary.
1.
Click Start - Settings - Printers and Faxes.
2. Right-click the printer driver of your printer and select Printing Preferences.
3. Define the required settings.
4. Click the [Save] icon in the Templates bar.
5.
Enter a name for the template.
6.
Click [OK].
7.
Right-click the template you just created and select 'Save as ticket'.
8.
Browse to the shared network folder and click [Save].
The template is saved as a hotfolder default ticket.
Do not change the name of the hotfolder default ticket ('default_ticket.jdf').
Canon varioPRINT 135 Series
Create a Hotfolder Default Ticket ('default_ticket.jdf')
® ®
Windows
Chapter 6 - Carry Out Print Jobs
XP operating system.
189