Canon varioPRINT 135 Series Operation Manual page 104

• Measure the distance for all the corners in the direction perpendicular to the feed direction.
• Calculate the average value in the feed direction (X) and the average value in the direction
perpendicular to the feed direction (Z).
3.
Enter the values according to the table below.
4.
Confirm the changed values.
5. Print the verification chart again and verify if the media registration is optimal.
If the media registration is not optimal, change the value or use another setting depending on
how the registration looks.
Values for the Media Registration
Settings front side
[X offset ({0})]
[Z offset ({0})]
Canon varioPRINT 135 Series
Values for the Media Registration
What to enter
The image is shifted in X direction (feed direc-
tion) in mm (inches).
A shift > 0 moves the image to the right-hand
side (trailing edge):
• The distance between the leading edge of
the sheet and the image on the sheet increa-
ses.
• The distance between the trailing edge of
the sheet and the image on the sheet de-
creases.
• The circles on the verification chart move to
the right-hand side (trailing edge).
A shift < 0 moves the image to the left-hand
side (leading edge):
• The distance between the leading edge of
the sheet and the image on the sheet de-
creases.
• The distance between the trailing edge of
the sheet and the image on the sheet increa-
ses.
• The circles on the verification chart move to
the left-hand side (leading edge).
The image is shifted in Z direction (perpendic-
ular on the feed direction) in mm (inches).
A shift > 0 moves the image to the top of the
sheet:
• The distance between the top of the sheet
and the image on the sheet decreases.
• The circles on the verification chart move to
the top of the sheet.
A shift < 0 moves the image to the bottom of
the sheet:
• The distance between the top of the sheet
and the image on the sheet increases.
• The circles on the verification chart move to
the bottom of the sheet.
Chapter 5 - Media Handling 103