JETWAY NF632N Series User Manual page 55

Use this item to manually select LCD panel type used by internal graphics device
by selecting the appropriate setup item.
The optional setting: [800x 480 18bit Single]; [800x 60018bit Single]; [800x 600
24bit Single]; [1024 x 60018bit Single]; [1024 x 768 18bit Single]; [1024 x 768 24bit
Single]; [1280 x 768 24bit Single]; [1280 x 800 18bit Single]; [1280 x 800
Single]; [1366 x 768 18bit Single]; [1366 x 768 24bit Single]; [1440 x 900 18bit
Dual]; [1440 x 900 24bit Dual]; [1280 x 1024 24bit Dual]; [1680 x 1050 24bit Dual];
[1920 x 1080 24bit Dual].
LVDS FW Write Protect
This item supports LVDS FW Update / Protect.
The optional settings: [Disabled]; [Enabled].
► Memory Configuration
Press [Enter] to view brief information for the working memory module.
► PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
USB Controller
Use this item to enable or disable this USB Physical Connector (physical port).
Once disabled, any USB devices plug inot the connector will not be detected by
BIOS or OS.
The optional settings: [Disabled]; [Enabled].
HD Audio
Use this item to control Detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled]; [Auto].
[Disabled]: HAD will be unconditionally disabled;
[Enabled]: HAD will be unconditionally enabled;
[Auto]: HAD will be enabled if present, disable otherwise.
Onboard Lan1 Controller
Use this item to enable or disable NIC.
When set as [Enabled], user can make further settings in 'Wake on LAN' item:
Wake on LAN
50
24bit