JETWAY NF632N Series User Manual page 50

Use this item to enable Ipv4 HTTP Boot Support. If disabled Ipv4 HTTP boot
option will not be created.
The optional settings: [Disabled]; [Enabled].
Ipv6 PXE Support
Use this item to enable Ipv6 PXE Boot Support. If disabled Ipv6 PXE boot option
will not be created.
The optional settings: [Disabled]; [Enabled].
Ipv6 HTTP Support
Use this item to enable Ipv6 HTTP Boot Support. When set as [Disabled], Ipv6
HTTP boot option will not be created.
The optional settings: [Disabled]; [Enabled].
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.
The optional settings range from [1] to [50].
 CSM Configuration
Press [Enter] to make settings for the following sub-items:
CSM Support
Use this item enable or disable CSM support.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Option ROM execution
Network
Use this item to control the execution of Legacy PXE OpROM.
The optional settings are: [Do not launch]; [Legacy].
Storage
Use this item to control the execution of UEFI and Legacy Storage OpROM.
The optional settings: [Do not launch]; [UEFI]; [Legacy].
Video
45