JETWAY NF632N Series User Manual page 45

Case Open Detect
Use this item to detect Case has already open or not. Show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if COPEN has been short or not (refer to
AT_COPEN jumper setting for Case Open Detection; if Pin 3&4 of jumper
AT_COPEN are short, system will show Case Open Message during POST).
 PC Health Status
Press [Enter] to view current hardware health status, set shutdown temperature, or
make further settings in 'SmartFAN Configuration'.
 SmartFAN Configuration
Press [Enter] to make settings for SmartFAN Configuration:
SmartFAN Configuration
CPUFAN Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN Full-Speed Temperature
Use this item to set CPUFAN full speed temperature. Fan will run at full speed
when above the pre-set temperature.
CPUFAN Full-Speed Duty
Use this item to set CPUFAN full speed duty. Fan will run at full speed when above
the pre-set duty.
CPUFAN Idle-Speed Temperature
Use this item to set CPUFAN idle speed temperature. Fan will run at idle speed
when below the pre-set temperature.
CPUFAN Idle-Speed Duty
Use this item to set CPUFAN idle speed duty. Fan will run at idle speed when
below the pre-set duty.
Shutdown Temperature Configuration
40