JETWAY NF632N Series User Manual page 38

The optional settings: [Disabled]; [Enabled].
*Note: Network Access must be activated first from MEBx Setup.
When set as [Enabled], the following items shall appear:
USB Configure
Use this item to enable or disable of AMT USB Provisioning.
The optional settings: [Disabled]; [Enabled].
PET Progress
Use this item to enable or disable PET Events Progress to receive PET Events.
The optional settings: [Disabled]; [Enabled].
AMT CIRA Timeout
OEM defined timeout for MPS connection to be established.
The setting range is from [0] to [255].
[0]: use the default timeout value of 60 seconds;
[255]: MEBx waits until the connection succeeds.
WatchDog
Use this item to enable or disable WatchDog Timer.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following items shall appear:
OS Timer
Use this item to set OS watchdog timer.
BIOS Timer
Use this item to set BIOS watchdog timer.
 Trusted Computing
Press [Enter] to enable or disable Security Device Support.
Configuration
Security Device Support
Use this item to enable or disable BIOS support for security device. TCG EFI
protocol and INT1A interface will not be available. O.S. will not show Security
Device. TCG EFI protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
33