Chunk Control; Action Control - Omron STC-MBS122BPOE Product Specifications And User's Manual

Chunk Control

10.19
This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive IBoolean Type
ChunkSelector IEnumeration Type
ChunkEnable IBoolean Type

Action Control

10.20
The multiple cameras control by one action signal.
GenICam Parameters
ActionQueueSize IInteger Type
ActionDeviceKey IInteger Type
ActionSelector IInteger Type
ActionGroupKey IInteger Type
ActionGroupMask IInteger Type
STC-MBS122BPOE / STC-MCS122BPOE
Product Specifications and User's Guide
Chunk control ON / OFF selection
Default: "False" (Off)
Transfer Chunk data selection
Selection: "Image", "Offset X", "Offset Y", "Width", "Height", "Pixel Format",
"Gain", "Exposure Time", "Black Level", "Line Status All",
"Device Temperature", "Timer Value" and "Counter Value"
Enable Chunk data that was selected at "Chunk Selector"
Selection: "True" (Enable Chunk data) and "False" (Disable Chunk data)
Size of scheduled action command queue
Control identifier of camera
Action command application selection
Fixed as "0"
Action command applies camera
* The camera executes action command when group key of action command
and group key of camera is matched.
Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action command is 1
for any bit of 32bits, camera executes action command.
No.19S207-00
56/73