Table of Contents
Advertisement
Installing the Casings on K300.
Before installing the casings you should check
immediately whether the packing is complete
and in perfect condition, possible damages or
parts missing must be reported before pro-
ceeding with installation. Following procedure
describes how to install the casings for the
K300 unit.
Equipment required.
Philips Screwdriver, PH2
10mm open ended spanner.
8mm open ended spanner.
Hexagonal / allen key 4mm
Required parts
Fig. 21
a)
Fit the top plate as shown in figure 21.
To ensure that the top is properly seated, it
contains four pins on the bottom that should fit
the springs in the frame.
Fig. 22
Fit the front grille, matching the holes in the
grille to the holes in the appliance (figure 22).
Fig. 23
Advertisement
Table of Contents
