Table of Contents
Advertisement
Fig. 16
d)
Repeat the process described above for
the other side panel and secure using four
screws from the kit, two on each side, as
shown in Figure 17
Fig. 17
Secure the side panels to the back of the unit
using 10 screws from the kit, as shown in
Fig. 15
Figure 18.
The cover is equipped with four guide pins (1)
in the bottom to ensure its proper placement.
These guide pins must be fitted onto the
springs in located in the structure.
Note:
You may need to gently press the guide pins
onto the structure to secure them.
Fig. 18
Fig. 19
Fig. 20
Advertisement
Table of Contents
