Table of Contents
Advertisement
You must then enter the Programme submenu,
using the P6 key to select and P3 to
validate the choice.
Then use the P4 and P6 keys to select Daily,
Weekly or Weekend. You must press P3 to
validate your choice.
For the Daily programme, you must use the P4
and P6 keys to select the day of the
week, in this case the programme for Monday,
and then press P3 to validate your
choice.
You must press P3 and this option will be in
editable mode, flashing. Press P4 and P6 to
select the desired time and then use the P3
key to save. Repeat this process for the
time at which the unit is to shut down, using P4
and P6. Finally, activate the interval by
pressing P5, and a check mark will appear to
the right of the interval.
In the image above the system will turn on at
20:30 on Monday and will turn off at
06:30 on Tuesday. When programs are devel-
oped around midnight with the intention of
starting operation the day before and finishing
operation the next day it will be
relevant:
- Set the OFF time of the day before at 23:59;
- Set the ON time for the next day at 00:00.
For the Weekly programme, the programmes
are the same for every day of the week,
from Monday to Sunday. Use the P4 and P6
buttons to select weekly from the
Programme submenu and press P3 to confirm
the choice.
Advertisement
Table of Contents
