Compaq Evo D300 Troubleshooting Manual page 80

Installing SCSI Drivers for Windows NT Installation
✎
E–2
On your primary system:
1. Place the OS CD in the CD-ROM drive and boot the system.
2. When the message "Setup is inspecting your computer's
hardware configuration" display, press the
will prompt you for the SCSI drivers.
3. Insert the diskette containing the drivers. When prompted,
choose S from the list to specify an additional device.
4. Choose Other from the list. When prompted, select your SCSI
controller.
5. Press the key to continue the installation.
Enter
After the drivers are installed, install Windows NT on your SCSI hard
drive. Remember to install the latest Service Pack.
For more information, visit the Compaq Web site at:
www.compaq.com/support/workstations
Click on your workstation model, then look for a Customer Advisory
related to the issue.
key. The system
F6
Troubleshooting Guide