Protecting The Environment - Stanley Genesis 07537 Instruction And Service Manual

E N G L I S H
HANDLE & END CAP
• Clean and inspect mouldings for cracks or other damage.
CURSOR
Clean and oil Mechanical Cursor 36 occasionally with a little light oil.
•

6.2 PROTECTING THE ENVIRONMENT

Assure conformity with applicable disposal regulations. Dispose all waste products at an approved waste facility or site so as
not to expose personnel and the environment to hazards.
Priming is ALWAYS necessary after the tool has been dismantled and prior to operating.
* Refers to items included in the service kits 07900-05300 & 71210-99990. For complete list see page 15.
Item numbers in bold refer to the general assemblies and parts lists on pages 19-20.
18
IMPORTANT
Check the tool against daily and weekly servicing.
O R I G I N A L I N S T R U C T I O N