Protecting The Environment; Technical Data - Stanley FATMAX SFMCE100B Manual

@
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
Š Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
Š Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent‑based cleaner.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage
RPM
Weight
Charger SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current A
Battery SFMCB201
Voltage 18
V
DC
Capacity
Ah 1.5
Type
Li‑Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 53 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 64 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a ) 7.5 m/s
h,w
SFMCE100
V
DC
min 2200‑2800
‑1
kg
SFMCB12 SFMCB14
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li‑Ion Li‑Ion
, uncertainty (K) 1.5 m/s
2 2
(Original instructions)
EC Declaration of Conformity
Stanley declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑4:2014.
These products also comply with directives, 2014/30/EU and
For more information, please contact Stanley at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley.
18V
2.17
230
Declaration of Conformity
18
The Supply of Machinery (Safety) Regulations
4
18
6.0
Li‑Ion
Stanley declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841‑1:2015, EN62841‑2‑4:2014.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley at the following
address or refer to the back of the manual.
ENGLISH
%
Machinery Directive
SFMCE100 Polisher
2011/65/EU
Patrick Diepenbach
General Manager, Benelux
Egide Walschaertsstraat 14‑18
2800 Mechelen, Belgium
2008
N
SFMCE100 Polisher
2008/1597 (as amended),
2012/3032 (as amended).
Stanley,
15.05.2022
9