Basic Setting Menu - Furuno FMD-3100 Operator's Manual

4.2.2

Basic Setting menu

To display this menu, click [DISP], [SET] and [Basic Setting] on the InstantAccess bar.
Symbols: Select how to display chart symbols. The options are [Simplified] and [Pa-
per Chart]. Simplified: The shape of symbols is of modern design and the sea mark
symbols are filled in a color. Paper Chart: The shape of symbols imitates traditional
symbols used in paper charts.
Depths : Set how to display different depth zones on the chart display.
Boundaries : Set how to display boundaries of some chart features. The options are
[Plain] and [Symbolized]. Plain: The line styles are limited to plain solid and dashed
lines. Symbolized: Some of the line styles use symbols to highlight the purpose of a
line.
Paper Chart: The shape of symbols imitates traditional symbols used in paper charts.
Depths: Set how to display different depth zones on the chart display. The choices are
[Two Color] or [Multi Color] . Two Color uses only two colors, deeper than safety contour
and shallower than safety contour. Multi Color uses four different colors for contours:
(1) Deeper than user-chosen deep contour, (2) Between deep contour and user-chosen
safety contour, (3) Between safety contour and user-chosen shallow water contour, and
(4) Between shallow water contour and coastline.
Light Sectors : Set how to display light sectors. The options are [Limited] and [ Full] .
Limited: The length of a light sector is fixed at 25 mm independently of the displayed
scale. Full : The length of a light sector represents its nominal range as defined by the
chart producer.
Light Popup: Show or hide light sectors information. [ON] provides light sector infor-
mation (including length of arc of visibility) when the cursor is put on a light or light sec-
tor.
Light house info Light house info
Light sector center Light sector center
4. HOW TO CONTROL CHART OBJECTS
4-3